You are not logged in.

Replacement of roofing, flashings and guttering at Sylvia Park School

Details

Tender Closed
RFx ID : 17340613
Tender Name : Replacement of roofing, flashings and guttering at Sylvia Park School
Reference # :
Open Date : Monday, 28 March 2016 8:00 AM (Pacific/Auckland UTC+13:00)
Close Date  : Friday, 22 April 2016 5:00 PM (Pacific/Auckland UTC+12:00)
Department/Business Unit : EIS
Tender Type : Request for Proposals (RFP)
Tender Coverage : Sole Agency  [?]
Categories :
  • 72102900 - Facility maintenance and repair services
  • 72103300 - Infrastructure maintenance and repair services
Regions:
  • Auckland
Exemption Reason : None
Required Pre-qualifications : None
Contact : All communication with the Buyer must be made via the GETS tender question and answer function.
Alternate Physical Delivery Address  :
Alternate Physical Fax Number  :
Overview

Block 3 - Remove and replace rusted through gutters and ridge flashing with new. Block 1 - Remove and replace rusted Room 6 roof with same 0.55mm steel corrugated roof profile sheets and replace screws as roof fixings which are lifting. Block 2 - Remove and replace rusted gutters on low back roof with large commercial half-round profile spouting with 100mm downpipes. Ensure that all new flashings, spouting’s, roof screws and fixings are installed as per MINEDU Weather Tightness Guidelines. Block 7 - Remove and replace rusted canopy valley flashing on Rm 15-17. Block 7 - Remove and replace Rooms18/19 roof with 0.55 steel corrugated roof profile sheets. Install mesh and insulation as Ministry requirements. Replace all gutters with new Block 4 - Remove and replace Hall roof with 0.55 steel Trapezoidal roof sheets. Install mesh and insulation as per Ministry requirements. Replace all gutters with new. Block 5 - Remove and replace Hall roof with 0.55 steel Trapezoidal roof sheets. Install mesh and insulation as per. Works should include all removal, installation of materials, deck ties and access equipment. All works to conform to Ministry's weather tightness requirements.