Kauri Dieback Cleaning Station Design

Details

Tender Closed
RFx ID :	18199915
Tender Name :	Kauri Dieback Cleaning Station Design
Reference # :
Open Date :	Friday, 2 December 2016 1:00 PM (Pacific/Auckland UTC+13:00)
Close Date  :	Friday, 2 December 2016 1:00 PM (Pacific/Auckland UTC+13:00)
Tender Type :	Notice of Information (Advance Notice) (NOI)
Tender Coverage :	Sole Agency  [?]
Categories :	30000000 - Structures and Building and Construction and Manufacturing Components and Supplies 31000000 - Manufacturing Components and Supplies
Regions:	New Zealand
Required Pre-qualifications :	None
Contact :	DOC Procurement Team procurement@doc.govt.nz Please direct all communication via GETS
Agency Address :

Kauri Dieback Cleaning Station Design is a consultant to design, manufacture and install the kauri dieback cleaning station as requested by the Kauri dieback Recreation Project

This tender has been completed.

Further information:
Agency name: Department of Conservation
Agency address: Level 5, 73 Rostrevor Street, Hamilton
Successful supplier’s name: MWDesign Ltd
Successful supplier’s address: MWDesign Limited
Attention – Mike Williams
PO Box 738
Cambridge 3450
Description of the services or goods: Kauri Dieback Cleaning Station Design in a consultant to design, manufacture and
install the kauri dieback cleaning station as requested by the Kauri dieback
Recreation Project
Please provide all the applicable tender codes. 30000000;31000000
Date the contract was awarded: 03 November 2016
Duration of the contract (including any extensions): 11 months
Estimated cost of the procurement: $50K-$100K
Type of Procurement Process: Selective procurement (Sole Source)
Exemption Justification: Type E
Prototype: Purchasing a prototype for research, experiment, study or original development. Original development may include a limited production or supply if this is necessary to:
i. carry out field tests and incorporate the findings, or
ii. prove that the good or service or works can be produced or supplied in large numbers to an agreed quality standard.
This exemption does not apply to quantity production or supply to establish commercial viability or to recover research and development costs.
Once the contract for the prototype has been fulfilled, any subsequent procurement must be openly advertised.

Date RFx was completed/updated: Friday, 2 December 2016 1:06 PM (Pacific/Auckland UTC+13:00)